On top of the full range of features and controls normally only seen in high end studio equipment, such as input and gain reduction metering, independent attack and release controls, a mix knob for parallel compression, and an external sidechain insert, we’ve now added a ‘tilt’ tone eq control, and a selectable sidechain high pass filter built into the Compressor’s detection circuit. Oh, and the whole package is now half the size and available in two snazzy colours!

Features

All Analog Signal Path - no digitals in here!
Extremely Transparent - Add dynamic control without altering the original tone of your instrument
3 Compression Ratios - 2:1, 4:1 and 10:1 ratios offer lots of flexibility
Attack and Release Control - allows for ultimate control over the compression characteristics
Mix - Blend uncompressed signal in with the compressed signal for parallel compression, New York Style!
Metering - Meter both gain reduction and input levels on separate meters.
Tone - New tone knob, a "tilt" sytle tone knob centered at 500Hz to nail that perfect tone.
Sidechain Send/Return- 3.5mm TRS jack send and return for sidechain compresson.
Sidechain High Pass Filter - No need to add a high pass filter to the sidechain, now there is one built in that can be toggled off or set to 120 or 240Hz.
True Display LEDs - Bright multi-color LEDs always let you know what the compressor is doing.
Power On Bypassed or Engaged - For musicians that never want to turn their compressor off.
True Bypass - The Empress Compressor employs true bypass, so you can be sure that it's not affecting the signal when disengaged.
Small Size - New enclosure approximately half the size of the original compressor, which is delightfully small when considering all the features packed into this unit.
Beautiful Case - It has a sparkle you can't deny, in blue or silver!

Specifications

Input Impedance	1M
Output Impedance	2.2k
Frequency Response (-3dB)	20Hz - 20kHz
Distortion	less than 0.1%
Noise	-101dB
Power Input Voltage	9 - 18 V DC (Negative tip)
Power Input Connector	2.1mm barrel connector (Negative tip)
Power Consumption	~ 100mA
Enclosure Material	Die Cast Aluminum
Input connector	1/4" Jack
Output connector	1/4" Jack
Height (Enclosure only)	1.5"
Height (including controls)	2.5"
Length	4.8"
Width	2.6"
Weight	1lbs